The new Multivan PanAmericana

The new Multivan PanAmericana – main image

The possibilities are endless with this car: the new Multivan PanAmerican is not only adaptable to changing needs, but also, thanks to its robust design, for off-road use.

The new Multivan PanAmericana combines the comfort of a Multivan with the off-road capabilities of an SUV. No matter where the road takes you, the Multivan PanAmericana is up to the task.

The car, unveiled a few months ago as a concept at the IAA in Frankfurt, has now arrived in production - this is the Bulli for individualists.

The new Multivan PanAmericana, thanks to its suspension raised by 20 mm and thanks to the 17-inch wheels (18-inch optional rims), made of light alloys, can easily navigate off-road. With properly painted bumpers, designer skid plates at the front and rear, door sill protectors and anti-scratch and stone-knock protection film on the sides of the Multivan PanAmericana, the Multivan PanAmericana can easily handle off-road driving.

panamericana-3jpg

In addition to functional equipment, the car boasts a unique, and at the same time extremely elegant appearance. The PanAmerican Multivan is equipped with tinted windows for the privacy of passengers, tinted LED rear lights, a chrome-plated protective radiator grille (as in the Highline version) and an elegant PanAmericana logo on the central roof pillars.

The car not only looks original from the outside - the checkered metal floor and solid rubber mats in the passenger compartment, available at an additional cost, allow you to transport muddy mountain bikes or snow-covered snowboards. These elements make it the perfect car for adventurous trips.

A multifunction steering wheel and gear knob covered with leather, Climatronic automatic air conditioning, lamps with the PanAmericana logo illuminating the interior when getting in, and pedals looking like aluminum complete the image of a multi-purpose car - durable and stylishly attractive.

panamericana-4jpg

Various materials have been used in the interior, which are elegant in appearance and, at the same time, are highly resistant to wear and dirt. Design elements such as seats with special Mithy inserts (black and white), Alcantara upholstery with decorative stitching in contrasting color and the optional BiColor leather upholstery emphasize the exclusivity of this special Multivan version.

The new Multivan PanAmericana is offered with 4MOTION all-wheel drive, but for the first time it can also be ordered as a front-wheel-only vehicle. This gives customers even more choice and allows them to choose the right version of the car to their individual needs.

Every gasoline and diesel engine (except for the 62 kW TDI) of the Multivan PanAmericany can be combined with all-wheel drive.

The new Multivan PanAmericana – image 1
The new Multivan PanAmericana – image 2
The new Multivan PanAmericana – image 3
The new Multivan PanAmericana – image 4
CampRest.com
CampRest.com

We have created the CampRest portal for people who value freedom and travel on their own.

Also read

2,500,000 cars from the Volkswagen Poznań factory – image 1
News
2,500,000 cars from the Volkswagen Poznań factory
Poznań, 27 July 2016 - Today, the two and a half millionth car in the history of the Company rolled off the assembly line of Volkswagen Poznań. This number of cars has been produced in Poznań since 1993. The jubilee is an opportunity for memories, summaries and presentation of plans for the Poznań Plants. The owner of the unique 2.5 millionth Volkswagen Caddy is Mr. Dominik Pochodyła, an entrepreneur who runs an orchard and a pressing plant on a daily basis. “2,500,000 cars are a beautiful anniversary for us. I am proud of our employees and how much our company has developed over the last twenty years. We are the largest employer in Greater Poland, a strong production center for the Volkswagen Commercial Vehicles brand with an average annual production of 170-175 thousand cars. Our position will strengthen with the launch of the new Volkswagen Crafter plant in Białężyce near Września, which is scheduled for the second half of this year ”. - says Dietmar Mnich, Director of the Volkswagen Plant in Antoninek in Poznań. Poznań did not immediately become the production center for Transporter and Caddy. In 1994, the assembly of Skoda Felicia cars was started in the factory - this year, less than 800 units of this model were manufactured here. In the following years, various models of brands were also assembled in Poznań: SEAT (Cordoba), Audi (A6) and Volkswagen (including Bora, Polo, Passat). In 1995, as the first automotive company in Poland, the factory obtained the DIN ISO 9002 certificate, which confirms the company's special care for the environment. Just a year later, Volkswagen Poznań established a foundry. To this day, it produces aluminum components, which are then installed in many cars of various brands from the Volkswagen concern. The years 2002 and 2003 were a breakthrough in the company's history. Then the last Skoda Fabia rolled off the assembly lines of the Poznań factory, and the factory was prepared for the production of two base models - Volkswagen Caddy and Volkswagen Transporter. Significant expansion of the factory involving, inter alia, on the construction of a modern paint shop and the creation of a special body shop, it meant not only an increase in employment, but also in the total production capacity from about 40,000 to about 170,000 cars per year. As a result, on December 11, 2007, the factory celebrated the production of the millionth car, the Caddy Maxi Furgon. In 2015, 170,810 vehicles were produced at Volkswagen Poznań: 20,447 Volkswagen Transporter models and 150,363 Volkswagen Caddy cars. These models are sent from Poznań to customers all over the world. Continuously since 2003, Volkswagen Poznań is the only factory in the world that produces the Volkswagen Caddy light commercial vehicle. Currently, the production capacity of the factory allows for the production of 720 cars a day.