How to install a roof skylight in a camper?

You've probably noticed that the roads fill up with campers in spring. However, many camping adventurers are faced with a seasonal problem: winter weather conditions have destroyed the old skylight in their camper, which is now leaking. Replacing it with a new one is inevitable, unfortunately. However, instead of spending your savings on costly repairs at the service center before you set off on your trip, we will show you step by step how to install and seal a skylight in your camper yourself, using the appropriate glue. Enjoy a peaceful holiday without breaking your holiday budget.

Problem with a leaking skylight in a camper? Here's how to deal with it:

Step no. 1: Marking the location of the skylight installation with tape

Before you start installing a skylight in your RV, measure and mark its location on the roof using adhesive tape. To do this, place the skylight on the roof hatch and then put tape around the edge of it. This will prevent excess glue from splashing on the camper's roof - the glue will only remain on the tape.

Useful tip: Choose adhesive tape that can be easily removed from the camper's roof without leaving any traces.

Expert Tip: Depending on the strength of your RV roof, consider placing a sheet of plywood on top of it to evenly distribute the weight and avoid dents in the roof.

Step no. 2 : Cleaning the skylight surface before gluing

The key to successful gluing of the skylight is to thoroughly clean its surface. The ideal solution is to use a specialized cleaning agent that will prepare the surface for glue application. For example, you can use a product such as WEICON Activating Cleaner . This technical spray not only cleans effectively, but also creates a perfect adhesive layer. Just spray it on the surface and then clean it thoroughly before applying the glue. You can find this and other technical sprays at https://www.pneumat.com.pl/spraye-aerozole-techniczne

Install a skylight in your RV using special glue

When installing a skylight on a camper's roof, the key is to use the right glue. We recommend our specialist WEICON technical glass adhesive , which has been specially developed for the installation of glass elements, including windows. It is a one-component adhesive and sealant that not only offers strong adhesion, but also retains elasticity.

Why is it worth choosing? Using this glue, you can not only glue the skylight firmly, but also seal it at the same time. An additional advantage is its exceptional resistance to aging processes and stability under the influence of UV radiation.

Step no. 3: Applying glue to the camper skylight

After precisely marking the installation locations on the camper's roof and carefully cleaning the surface, it is time to install a new skylight! Before starting to work with glue, do not forget to wear protective gloves. This will protect your hands and prevent accidental contamination of the glue. Now prepare a special application gun and apply the glass glue evenly along the edge of the lower part of the skylight. Make sure you cover the entire surface evenly to ensure solid support and sealing of the skylight. It is better to use a little more glue than too little, which guarantees a solid fixation. Any excess glue can be easily removed with adhesive tape.

Step no. 4: Installing a skylight in a camper

It's time to install a new roof skylight in your camper! Proceed with installation, making sure the window is correctly positioned in the roof opening. It is important that the hinges face the front of the vehicle. Then gently press the skylight against the roof and tighten it to the inner frame from the inside of the camper. Now all you need to do is remove the adhesive tape and any excess window adhesive. If there is adhesive left on your camper's roof, you can easily remove it with an absorbent cloth and our multi-purpose surface cleaner, which is safe for a variety of materials. You can buy these and other products in the field of technical chemistry at https://www.pneumat.com.pl/chemia-przemyslowa-techniczna

Did you like this article? If so, we have something else for you! We cordially invite you to read our other material, which this time focuses on the comprehensive process of camper renovation . You will find a lot of useful information and tips on refreshing and modernizing your home on wheels! We also encourage you to familiarize yourself with the entire offer of Pneumat, which, apart from the mentioned technical chemicals, is a Polish manufacturer of gas springs. Gas actuators   Pneumat production. They will work well as elements installed in camper van flaps, roof windows and many other applications in a caravan.